NPort 6650-16-48V

16 port RS-232/422/485 secure device server, 48VDC(20 to 72VDC and -20 to -72VDC)

$0.00 *
*Price as configured:

This product is configurable.
Click here to see configuration options

The NPort® 6600 series of secure device servers is the right choice for applications that use large numbers of serial devices packed into a small space. If you're worried about security, you can rest assured with the NPort® 6600, since it supports DES, 3DES, and AES, the three most common standards for data encryption. Serial devices of any type can be connected to the NPort® 6600, and each serial port on the NPort® can be configured independently for RS-232, RS-422, or RS-485 transmission.

The NPort® 6600 has a built-in LCD panel for configuration and selecting operation modes. The panel displays the server name, serial number, and IP address, and any of the device server's configuration parameters, such as IP address, netmask, and gateway address, can be updated easily and quickly.

The NPort® 6600 provides adjustable termination, pull high, and pull low resistors for RS-485 communication. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high and pull low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values works for every environment, the NPort®6600 allows manual adjustment of the resistor values for each serial port using built-in DIP switches.

NPort 6650-16-48V

Configuration Options for NPort 6650-16-48V

16-port RS-232/422/485 to Ethernet Secure Terminal Server, ¬±48 VDC input   +$1,249.00
  • DK-DC50131  Din-Rail Mounting Kit
    DK35A
    DIN Rail Mounting Kit (35mm)
    +$4.00
    Qty:
  • NM-FX02-S-SC
    NM-FX02-S-SC
    Two100BaseFx single mode Ethernet with SC connector module
    +$399.00
    Qty:
  • NM-FX02-M-SC
    NM-FX02-M-SC
    Two 100BaseFx multi mode Ethernet with SC connector module
    +$349.00
    Qty:
  • NM-FX01-S-SC
    NM-FX01-S-SC
    One 100BaseFx single mode Ethernet with SC connector module
    +$179.00
    Qty:
  • NM-FX01-M-SC
    NM-FX01-M-SC
    One 100BaseFx multi mode Ethernet with SC connector module
    +$149.00
    Qty:
  • NM-Modem
    NM-Modem
    Analog 56k Modem Module for the Nport 6000 series
    +$239.00
    Qty:
  • CBL-RJ45F25-150  Connection Cable
    CBL-RJ45F25-150
    150 cm 8-pin RJ45 to female DB25 RS-232 (DCE) cable for NP5600, NP5210, CP104JU
    +$15.00
    Qty:
  • CBL-RJ45F9-150  Connection Cable
    CBL-RJ45F9-150
    150 cm 8-pin RJ45 to female DB9 RS-232 (DCE) cable for NP5600, NP5210, CP104JU
    +$15.00
    Qty:
  • CBL-RJ45M25-150  Connection Cable
    CBL-RJ45M25-150
    150 cm 8-pin RJ45 to male DB25 RS-232 (DTE) cable for NP5600, NP5210, CP104JU
    +$15.00
    Qty:
  • CBL-RJ45M9-150  Connection Cable
    CBL-RJ45M9-150
    150 cm 8-pin RJ45 to male DB9 RS-232 (DTE) cable for NP5600, NP5210, CP104JU
    +$15.00
    Qty:
  • NP21101  Connector
    NP21101
    Male DB25 to female DB9 RS-232 cable; 30 cm
    +$10.00
    Qty:

$0.00 *
*Price as configured:

Additional Information

Manufacturer MOXA